You are here:
  1. Home
  2. Water Feature & Pond Accessories
  3. 3-1 Pipe Connector
SKU: 6017

3-1 Pipe Connector

£9.00

Our 3-1 Pipe Connectors are designed to fit both 1/2  inch pipe and 3/4 inch pipe. It also allows you to control the water flow on each of the sections.

The idea of a 3-1 connector is to allow you to run up to three water features/ fountains off one pump.

If you would like only two features running then you can turn the flow off completely on the third connector

You may also like

EC FLOATING FOUNTAIN
Out Of Stock

EC FLOATING FOUNTAIN

£119.00
6101 floating fountain comes complete with pump 2500lt pump pipe float polished aluminum fountain head 48 auto changing lights that travel up the spray of the fountain over 1m high needs weight attached in pond to keep in position but is ready to use just fit in pond and plug in and away you go and at night it will transform the look of your pond great for the dark nights to add a bit of colour in our lives.
450 L/H Pump

450 L/H Pump

£22.00

Water Feature Pump - 450L/H - mains powered

Our best range of pumps for powering water features. They come in a wide range of sizes and the design of the pump does vary depending on the litres per hour (LPH) of the pump. These pumps are supplied without fountainheads or other accessories.


Maximum Performance Maximum Delivery HeadPower Consumption Outlet Hosetail Size Multi Size Hosetail Cable Length Dimensions 

450 L/H




Yes (3/4" and 1") 10m 
DUST TO DAWN LIGHT SENSOR

DUST TO DAWN LIGHT SENSOR

£11.00
6115 Dusk to dawn light sensor well this is one of those things that you think how did I manage before it fits in to the line from transformer to low voltage light_x000D_ And turns them on when it goes dark and off when it get light will work on most low voltage products even Xmas lights as long as it two pin fittings
3 to 1 connector with connecting cable

3 to 1 connector with connecting cable

£15.99
This is a 1 to 3 pipe connector allows you to run up to 3 lights at once. It comes in two lengths 3m and 12m depending on the size of your feature. There is also an extension cable of 6m available.   This is perfect for adding extra spot lights to your water feature.
2500 L/H Pump

2500 L/H Pump

£60.00

Water Feature Pump - 2500L/H - mains powered

Our best range of pumps for powering water features. They come in a wide range of sizes and the design of the pump does vary depending on the litres per hour (LPH) of the pump. These pumps are supplied without fountainheads or other accessories.

Please note - Max Delivery Head is the maximum height the water will reach if it's going up a pipe. This is based on the pipe being 1" in diameter.

Maximum Performance Maximum Delivery Head Power Consumption Outlet Hosetail Size Multi Size Hosetail Cable Length Dimensions

2500 L/H

 3.5 metres high 20 watts 1/2" , 3/4" and 1inch Yes (3/4" and 1") 10 metre outdoor cable

Set of 3 Halogen/ LED lights
Out Of Stock

Set of 3 Halogen/ LED lights

£50.00
Set of 3 Halogen/ LED spot lights_x000D_ _x000D_ There is a 1.5m cable between each light. The Set of 3 Halogen/ LED lights EXTRA has a 10 meter cable between each light.
6 Bulb LED - 8 meters

6 Bulb LED - 8 meters

£24.50
This 6 bulb LED light is suitable for all of our water features. With a two pin water tight connector and8 meters of cable   Light head - Diameter 30mm Cable Length - 8 meters
6 LED light with Low Voltage Water Feature Transformer
Choose Feature Light Colour

6 LED light with Low Voltage Water Feature Transformer

£46.80
 
  • This 6 bulb LED light is suitable for all of our water features. With a two pin water tight connector and 8 meters of cableLight head – Diameter 30mm Cable Length – 8 meters
  • We always recommended keeping transformers either indoors or inside a weatherproof box, this will prolong the life of the transformer
  • Female connector with two holes
  • AC cord with 2 metres of cable and UK 3 pin plug
The total length of the light & transformer is 8meters
Replacement LED 6 blub
Choose Feature Light Colour

Replacement LED 6 blub

£20.00
This 6 bulb LED light is suitable for all of our water features. With a two pin water tight connector and 2 meters of cable. You can add a 6 meter extension cable if required.   Light head - Diameter 30mm Cable Length - 2 Meters
Grey Granite Plinth- dia20x5cm H

Grey Granite Plinth- dia20x5cm H

£24.99
GREY GRANITE PLINTH’S CAN BE ADDED TO A WATERFEATURE TO GIVE IT EXTRA HIGHT AND GIVE YOU DRIPPING WATER WHICH WILL LOOK AND SOUND GREAT. ASLO GREAT IF YOU USING PEBBLES AS IT LIFTS THE FEATURE UP ENOUGH SO NOT HINDEN BY PEBBLES SO  AS SEEN IN SECOND AND THIRD PHOTOS. WHY NOT ADD TWO OR THREE TO MAKE YOUR WATER FEATURE REALLY STAND OUT. DIAMETER = 200MM HGHT = 50MM